Ключевые слова: MRI magnets, overcurrent, test results, discharge characteristics, insulating medium, REBCO, coated conductors, coils, quench protection, design, design parameters
Ключевые слова: renewable energy systems, power equipment, SMES, MgB2, Rutherford cables, coils, design, design parameters, heat loads, cooling technology, efficiency, modeling, numerical analysis
Ключевые слова: HTS, REBCO, coated conductors, coils pancake, stacked blocks, conduction cooled systems, winding techniques, winding configurations, insulationless, design parameters, quench protection, thermal runaway, fabrication, test results, nitrogen liquid , critical caracteristics, critical current, n-value, resistance, discharge characteristics, overcurrent, field decay
Tasaki K., Nomura S., Noguchi S., Miyazaki H., Kurusu T., Ishiyama A., Ueda H., Tosaka T., Takahashi M., Iwai S., Urayama S., Fukuyama H., Otani Y., Uto T.
Nomura S., Noguchi S., Miyazaki H., Kurusu T., Ishiyama A., Ueda H., Tosaka T., Urayama S., Fukuyama H., Nakazono K.
Ключевые слова: HTS, magnets, conduction cooled systems, cryocoolers, thermal insulation, impedance, thermal properties, REBCO, coated conductors, coils pancake, coils racetrack, fabrication, impregnation, comparison, critical caracteristics, current-voltage characteristics, n-value, critical current, stainless steel, test results
Tasaki K., Nomura S., Noguchi S., Miyazaki H., Kurusu T., Ishiyama A., Ueda H., Tosaka T., Takahashi M., Iwai S., Urayama S., Fukuyama H., Otani Y., Uto T.
Nakamura T., Nomura S., Tsutsui H., Chikaraishi H., Yagai T., Yanagi N., Imagawa S., Kamada H., Akai H., Ryun R.D.
Nakamura T., Nomura S., Tsutsui H., Chikaraishi H., Yagai T., Yanagi N., Kimura Y., Imagawa S., Kamada H.
Ключевые слова: HTS, coated conductors, YBCO, high field magnets, helical winding, coils, winding techniques, operational performance
Tasaki K., Nomura S., Noguchi S., Miyazaki H., Kurusu T., Ishiyama A., Ueda H., Tosaka T., Takahashi M., Iwai S., Urayama S., Fukuyama H., Otani Y.
Tasaki K., Nomura S., Noguchi S., Miyazaki H., Kurusu T., Ishiyama A., Ueda H., Tosaka T., Iwai S., Urayama S., Fukuyama H., Ohtani Y.
Ключевые слова: MRI magnets, HTS, REBCO, coated conductors, coils pancake, design parameters, stacked blocks, screening current, degradation studies, fabrication, test results, conduction cooled systems, critical caracteristics, critical current, n-value, current-voltage characteristics, magnetic field distribution, screen
Nomura S., Noguchi S., Miyazaki H., Kurusu T., Ishiyama A., Ueda H., Tosaka T., Wang T., Iwai S., Urayama S., Fukuyama H., Imaichi Y.
Tasaki K., Nomura S., Noguchi S., Miyazaki H., Kurusu T., Ishiyama A., Ueda H., Tosaka T., Takahashi M., Iwai S., Urayama S., Fukuyama H., Otani Y.
Nomura S., Noguchi S., Kurusu T., Ueda H., Tosaka T., Wang T., Urayama S., Fukuyama H., Matsumi A., Miyazaki A.I.
Nomura S., Noguchi S., Miyazaki H., Kurusu T., Ishiyama A., Tosaka T., Wang T., Urayama S., Fukuyama H., Ueda A.M.
Tasaki K., Nomura S., Noguchi S., Miyazaki H., Kurusu T., Ishiyama A., Ueda H., Tosaka T., Takahashi M., Iwai S., Urayama S., Fukuyama H., Otani Y.
Ключевые слова: MRI magnets, high field magnets, HTS, REBCO, coated conductors, conduction cooled systems, coils model, coils pancake, screening current, test results
Tasaki K., Nomura S., Noguchi S., Miyazaki H., Kurusu T., Ishiyama A., Ueda H., Tosaka T., Takahashi M., Iwai S., Urayama S., Fukuyama H., Otani Y.
Ключевые слова: MRI magnets, high field magnets, design, design parameters, conduction cooled systems, HTS, REBCO, coated conductors, coils pancake
Nakamura T., Nomura S., Tsutsui H., Chikaraishi H., Yagai T., Yanagi N., Kimura Y., Imagawa S., Yoshida H., Kamada H., Kudo M.
Ключевые слова: HTS, YBCO, coated conductors, mechanical properties, bending process, strain effects, distribution, experimental results, coils, SMES
Ключевые слова: helical winding, coils toroidal, bending process, mechanical properties, modeling, numerical analysis, torsion strain, distribution
Nomura S., Miyazaki H., Kurusu T., Ishiyama A., Wang X., Ueda H., Tosaka T., Agatsuma K., Wang T., Urayama S., Fukuyama H., Ariya Y.
Ключевые слова: SMES, design, pulsed operation, power supply, converters, synchrotron, magnets, design parameters, coils toroidal, HTS, YBCO, coated conductors
Tasaki K., Nomura S., Noguchi S., Miyazaki H., Kurusu T., Ishiyama A., Ueda H., Tosaka T., Takahashi M., Iwai S., Urayama S., Fukuyama H., Otani Y.
Ключевые слова: coated conductors, MRI magnets, high field magnets, HTS, REBCO, coils pancake, design, screening current, size effect, plans
Ключевые слова: SMES, HTS, YBCO, coated conductors, substrate Hastelloy, coils helical, design parameters, heat loads, modeling, power equipment
Ключевые слова: magnets, converters, control systems
Ключевые слова: power equipment, SMES, power supply, switches, converters, magnets, grid operation, experimental results
Ключевые слова: coils helical, SMES, power equipment, acoustic emission, quench properties, LTS, NbTi, experimental results
Ключевые слова: SMES, economic analysis, power compensator, design parameters, coils, review, power equipment
Ключевые слова: power equipment, SMES, power compensator, fluctuations, economic analysis, review, Japan
Ключевые слова: SMES, coils model, LTS, NbTi, strands, coils toroidal, coils helical, design parameters, experimental results, power equipment
Ключевые слова: SMES, hydrogen, coils solenoidal, HTS, Bi2223, MgB2, design parameters, wires, tapes, power equipment
Ono M., Nomura S., Nagaya S., Hirano N., Koyanagi K., Takigami H., Ohsemochi K., Tosaka T., Takahashi M., Ogata H., Ishii Y., Kidoguchi K., Onoda H., Nakamoto K.
Ключевые слова: SMES, HTS, Bi2212, Rutherford cables, LTS, NbTi, hybrid systems, coils pancake, mechanical properties, thermal runaway, experimental results, power equipment
Ono M., Nomura S., Nagaya S., Hirano N., Kurusu T., Shimada K., Koyanagi K., Ohsemochi K., Tosaka T., Takahashi M., Ishii Y., Kidoguchi K., Onoda H.
Ключевые слова: MgB2, coils, winding configurations, SMES, modeling, current density, numerical analysis, wires, power equipment
Ключевые слова: SMES, modeling, coils helical, power equipment, flexibility
Ключевые слова: cryogenic systems, hydrogen, magnets, MgB2, SMES, modeling, power equipment
Ключевые слова: SMES, synchrotron, design parameters, economic analysis, power equipment
Tasaki K., Ono M., Nomura S., Nagaya S., Hirano N., Kurusu T., Shimada K., Koyanagi K., Ohsemochi K., Tosaka T., Ishii Y., Kidoguchi K., Onoda H.
Ключевые слова: SMES, coils, design parameters, LTS, NbTi, dc performance, test results, experimental results, quench protection, power equipment, new
Ключевые слова: SMES, LTS, NbTi, coils toroidal, coils helical, design parameters, winding configurations, cryogenic systems, stress effects, experimental results, power equipment
Ключевые слова: SMES, modeling, power equipment
Kuriyama T., Nomura S., Takahashi Y., Inoue K., Hobara N., Yazawa T., Ootani Y., Sakai M., Ohkuma T.
Nomura S., Takahashi Y., Inoue K., Hobara N., Yazawa T., Ohkuma T., Ohtani Y.(yasumi.ootani@toshiba.co.jp), Kurita T.
Ключевые слова: FCL rectifier type, magnets, HTS, Bi2223, tapes, coils, cryogenic systems, pulsed operation, cryocoolers, test results, power equipment
Ключевые слова: SMES, coils helical, coils toroidal, electromagnetic forces, current density, numerical analysis, power equipment, high field magnets
Ключевые слова: SMES, HTS, Bi2223/Ag, tapes, ac losses, thermal stability, conduction cooled systems, coils pancake, test results, power equipment
Ключевые слова: LTS, NbTi, coils helical, coils toroidal, design, fabrication, electromagnetic forces, SMES, power equipment
Ключевые слова: SMES, coils helical, coils toroidal, numerical analysis, stress distribution, power equipment
Suzuki Y., Nomura S., Nakamura K., Yamaguchi S., Ishigohka T., Ninomiya A., Famakinwa T.(tosin@isc.chubu.ac.jp), Fukuwa S., Susumi M., Ikezawa S.
Ключевые слова: HTS, Bi2223, tapes, current distribution, ac losses, measurement setup
Ключевые слова: FCL rectifier type, HTS, Bi2223, tapes, coils model, breakdown characteristics, insulating medium, voltage waveforms, current leads, test results, power equipment
Tasaki K., Kuriyama T., Nomura S., Takahashi Y., Hobara N., Koyama H., Ohkuma T.(ohkuma.takeshi@tepco.co.jp), Inoue K.(super-gm@nifty.com), Yazawa T.(takashi.yazawa@toshiba.co.jp)
Ключевые слова: FCL rectifier type, HTS, Bi2223, tapes, coils, cooling technology, critical current, current distribution, test results, power equipment, critical caracteristics
Kuriyama T., Ohsemochi K.(koichi.oosemochi@toshiba.co.jp), Ono M., Nomura S., Kasahara H., Akita S., Koso S.
Ключевые слова: SMES, HTS, Bi2223, coils model, YBCO, bulk, current leads, cooling technology, experimental results, power equipment, magnetic properties
Kuriyama T., Nomura S., Funaki K., Hayashi H., Tsutsumi K., Tasaki K.(kenji2.tasaki@toshiba.co.jp), Sumiyoshi Y., Kimura H., Iwakuma M.
Ключевые слова: SMES, coils helical, mechanical strain, experimental results, numerical analysis, LTS, NbTi, power equipment
Nomura S., Shimada R., Tsutsui H., Watanabe N., Suzuki C., Kajita S., Ohata Y., Takaku T., Koizumi E., Tsuji-Lio S.
Ключевые слова: SMES, LTS, NbTi, coils helical, electromagnetic forces, mechanical effects, experimental results, numerical analysis, power equipment
Ключевые слова: HTS, YBCO, bulk, motors, levitation performance, torque, rotating characteristics, rotational speed, experimental results, rotating machines, new
© Copyright 2006-2012. Использование материалов сайта возможно только с обязательной ссылкой на сайт.
Свои замечания и пожелания вы можете направлять по адресу perst@isssph.kiae.ru
Техническая поддержка Alexey, дизайн Teodor.